SKU: N/AThis site contains affiliate links for which we may be compensated
Consumer Electronics / TV, Video & Home Audio / TV, Video & Audio Accessories / Audio/Video Transmitters
This lot includes two (2) new in box Kramer WP-572 wall plates in white. These were extra components from an installation project and were never used. They have only been removed from the box for photos. These work with the WP-571 and a variety of other Kramer products using the DGKat signal. We have used them in many installs over distances of up to 250ft with great success. Power supplies and parts included as they come from the manufacturer. From the manufacturer: The WP−572 is a PoC DGKat™ twisted pair receiver for HDMI
signals. The WP−571 converts an HDMI signal to a single twisted pair signal and
the WP−572 converts the twisted pair signal back to an HDMI signal. Max. Data Rate —
4.95Gbps (1.65Gbps per graphic channel). HDTV Compatible. HDCP Compliant. DGKat™ Signal
Integration — Kramer’s unique technology for converting TMDS as well as control
and communication to signals that run over twisted pair cables. HDMI Support —
x.v.Color™, up to 7.1 Uncompressed Audio Channels. 3D Pass–Through. System Range — Up to
90m (295ft) at 1080i @60hz or up to 70m (230ft) at 1080p @ 60hz when using
Kramer DGKat cables. Note: Transmission range depends on the signal resolution,
graphics card and display used. If using third–party shielded CAT cables, both
ends of the shield must be soldered to the connectors for the products to
function properly. EDID PassThru —
Passes EDID signals between the source and display. ON LED — Lights red
when receiving power only, orange when either input or output and power are
attached, and green when both an active input and output are attached. Power Connect™ System
— A single connection to the transmitter powers the receiver. Dimensions — 3.3cm x
3.6cm x 10.4cm (1.3" x 1.42" x 4.1") W, D, H. Wall Plate Size — 1
gang US.